Call of Duty WW2 Servers Down: Error Code 103295, 36896, 4128 Fix

XBOX ONE FIND IP ADDRESSPS4 CLEAR CACHE

  1. Turn off your PS4
  2. Unplug the power cord
  3. Wait for 30 – 60 seconds
  4. Plug the power cord back in
  5. Turn on your PS4

XBOX ONE CLEAR CACHE

  1. Turn off your Xbox One
  2. Unplug the power brick
  3. Wait for 30 – 60 seconds
  4. Plug the power brick back in
  5. Turn on your Xbox One

PC VERIFY CACHE

  1. Load Steam
  2. Right-click CoD WW2 in your library
  3. Select Properties
  4. Select Local Files tab and then click Verify integrity of game cache…
  5. Wait while Steam verifies the integrity of the game’s files
  6. Exit the window after the process is completed

 

CoD WWII Cannot Connect to Cost / Unable to Connect to Host Fix: Change Your NAT to Open

You may find that your issues with inviting your friends stem from your NAT type being set to strict, with an open NAT being preferable. To change your NAT type, you will first need to know the IP address on your PS4 and Xbox One.

PS4 FIND IP ADDRESS

  1. Go to Settings
  2. Go to Network
  3. Go to View Connect Status
  4. Make note of the numbers listed next to IP Address

XBOX ONE FIND IP ADDRESS

  1. Go to Settings
  2. Go to Network
  3. Make note of the numbers listed next to IP address

PC FIND IP ADDRESS

  1. Enter Command Prompt (type cmd into the search bar in Windows 10)
  2. Type inconfig next to C:\users\your user profile
  3. Copy IPv4 Address

You’ll then need to take note of the following ports to forward for each platform:

COD WW2 PC PORTS TO FORWARDTCP: 3074, 27015-27030, 27036-27037 UDP: 3074, 4380, 27000-27031, 27036

COD WW2 XBOX ONE PORTS TO FORWARDTCP: 53, 80, 3074 UDP: 53, 88, 500, 3074, 3544, 4500

COD WW2 PS4 PORTS TO FORWARDTCP: 80, 443, 3074, 3478-3480 UDP: 3074, 3478-3479

HOW TO CHANGE YOUR NAT TO OPEN

  • Go to your file explorer
  • Go to Network
  • Right-click on your router located beneath Network Infrastructure
  • Go to Settings
  • Write a name beneath Description of service (e.g. COD WW2)
  • Write the IP address found on your PS4 / Xbox One / PC
  • In both External Port and Internal Port, write each TCP number including in the above Ports to Forward section (for instance, on PS4 write 80 in both Internal and External Port, then click OK. Repeat this step until every TCP code has been entered.)
  • After each TCP number has been entered, change the selection to UDP and do the same for these numbers, entering each number twice.

This should set your NAT type to open, and should allow you to navigate around the connect to host error.

 

Summary
Review Date
Reviewed Item
PS4 CLEAR CACHE
Author Rating
51star1star1star1star1star